Insulation Contractor in Jacksonville, TX - Fewer Drafts From Attic to Crawl Space
Elite Tyler Spray Foam Insulation insulates and air seals homes and small businesses in Jacksonville, Texas. We come down from Tyler to work on attics, walls and crawl spaces, from older pier-and-beam houses to newer builds.
- Licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
Older homes and small shops across Jacksonville
Jacksonville has a lot of houses that families have lived in for decades, newer homes going up around the edges, and a downtown of older storefronts where the cooling never quite reaches the back room. Our calls here come from homeowners, from landlords keeping rentals livable, and from small business owners who want the work done carefully and without a mess.
Jobs here run a lot like ours in Henderson and back home in Tyler, except more of the older houses sit up on piers. A house that's open underneath loses heat through the floor as well as the ceiling, so the job here often covers the attic and the crawl space both.
Our services in Jacksonville, TX
- Attic insulation
Older Jacksonville attics often hold a few inches at most, so the upstairs runs hot. We measure what's there and blow loose fill evenly out to the eaves, not just the middle.
- Crawl space insulation
Houses up on piers often have bare framing over an open crawl space, so the floors run cold. Crawl space insulation covers that underside so the room holds its heat.
- Insulation removal
In older Jacksonville rentals, attic insulation is often packed flat, stained or full of droppings. We pull it out first, because new material laid over that just keeps the problem.
- Attic air sealing
Ceilings in houses this age leak air at can lights, pipes and the attic hatch. We seal those gaps before insulating, so the new layer isn't fighting a draft.
- Retrofit insulation
Many older homes here have little or nothing inside the outside walls. We fill finished walls through small holes and patch them, so nobody tears out drywall.
- Commercial insulation
Small shops in Jacksonville's older downtown buildings often have little insulation above high ceilings. We schedule around your business hours, so customers aren't stepping around our crew.
What Jacksonville's older houses need from insulation
Most calls from Jacksonville start with a hot upstairs, a drafty bedroom or the room over the garage that never feels right. In houses this age, that usually traces back to an attic layer that's settled down to a few inches, an addition that got less insulation than the rest of the house, or a crawl space nobody has looked at in years. I ask what you've noticed first, then go up and look, because what you need depends on whether the old material is still sound and whether the vents along the eaves are clear or buried under it. Sometimes the answer is that your insulation is fine, and I'll tell you that. When we do take the job, our installers do the work and I check it with them before we pack up.
Ductwork running through the attic changes my advice. Spray foam costs more, but it seals air while it insulates and pulls those ducts into the cooled part of the house, so it's usually worth it there. In an attic without ducts, sealing the gaps and topping up loose fill usually wins. If the ducts themselves need moving, that's work for your HVAC company, because the city issues mechanical permits only to a licensed air conditioning and heating contractor with proof of insurance.
Get a free insulation estimate at your Jacksonville home
We reply to every call and form within one business day to set a time that works for you. I come out to your Jacksonville house myself, walk the attic and crawl space with you, and show you what I found and what your choices are. The estimate is free, and there's no pressure and no obligation.
Insulation work, up close
Jacksonville insulation questions answered
How do I find out if insulation work needs a permit in Jacksonville, TX?
Ask the city's Building Inspections department, which tells you whether a project meets city code and what it needs before work begins. Its permit list names things like carports, pools, patio covers and storage buildings rather than insulation, and the city's earlier permit guide says a remodel needs permits for the parts of the house it affects. If the city wants a permit, we file it and set up the inspections, and if it isn't clear, we check with the city before we start.
Does an insulation contractor have to register with the City of Jacksonville?
Yes, the city requires every contractor who works in Jacksonville to register before it will issue a permit. The city gives its registration requirements at 903-589-3510. We're licensed and insured, and when your job needs a permit, we take care of that paperwork before anyone climbs into your attic.
How much does insulation cost for a house in Jacksonville, TX?
The price comes down to how much attic or crawl space you have, what's already up there and which material you choose, so I give you your own figure after I've looked. Pulling out soaked or dirty old insulation adds to the job, and so does the foam choice I described above, and those same things set how long we're in your attic. If the city calls for a permit, its fee schedule lists $150 for a residential remodel.
Who can pull an electrical or plumbing permit in Jacksonville, TX?
The city issues electrical permits only to a master electrician with a $5,000 bond or a homeowner working on their own homestead, and plumbing and gas permits only to a master plumber carrying $300,000 in insurance or a homestead homeowner. That matters when we find old wiring in the attic or a leaking pipe in the crawl space, because we don't do that work ourselves. I'll show you what we found so the repair gets done before we cover it up.
How long does it take before we can go back in the house after spray foam in Jacksonville?
You come back once the foam maker's re-entry time, the wait before people and pets can safely return, has passed, and I'll tell you those hours before we start. Kids and pets stay out for that whole window while we ventilate and the foam sets. Blown-in loose fill and air sealing usually don't mean leaving the house, so whether you plan a day away depends on the material we pick together.
What causes cold floors and a hot upstairs in an older Jacksonville house?
Usually it's thin, flattened insulation overhead and an open crawl space underfoot, with air slipping through gaps in between. Heat moves through those weak spots the way it moves through a thin coffee mug, so the rooms over them feel it first. We fix the cause in the order it matters, sealing the leaks before adding material, rather than just piling more on top.