Blown-in insulation in Tyler, TX - even coverage from wall to wall over a sealed attic
If the upstairs runs hot and the power bill climbs, a thin attic is usually why. We seal gaps, then blow in an even layer.
Is blown-in insulation the right fix for my attic in Tyler?
Blown-in insulation is loose fill that we blow through a hose onto your attic floor, and for most houses in Tyler it's the simplest way to fill a thin or patchy attic so the rooms below hold their temperature.
Most people call me because the upstairs runs hot, the room over the garage never cools off or the power bill keeps creeping up, and in an older house that usually means there's not much up there, or what's there has settled and pulled away from the edges. The price mostly comes down to how big the attic is, how many gaps and can lights need attic air sealing, whether old insulation has to come out first and whether storage decking is in the way. Those same things set the schedule, along with whether the city wants a permit, and when it does, we file it and set up the inspections for you. When I come out, I'll show you what I found and explain your choices before you decide anything.
How we do blown-in insulation, step by step
I start by checking how many inches are already up there and whether they're dry and clean, because fresh material blown over insulation that's been soaked or full of droppings just buries the problem. Then our crew closes the gaps where house air leaks into the attic, the same way you'd plug the holes in a cooler before you fill it with ice. We set baffles at the eaves, which are guards that hold the insulation back so the vents keep the attic breathing, and we keep the insulation away from flues and hot fixtures. Then we spread it level from wall to wall and build the edges up as full as the middle, since thin edges over the outside walls are where a lot of attics come up short. You'll be able to see the depth for yourself before we leave.
If what's up there is wet or full of droppings, insulation removal comes first, and if the drafts and cold floors go beyond the attic, we can look at home insulation for the walls and crawl space too. One trade-off I'll walk you through is foam. It costs more and seals air while it insulates, but for most attics, sealing the gaps and topping up loose fill does the job, unless your ductwork lives up there, and then foam is usually worth a conversation.
Why people in Tyler call us for blown-in insulation
I walk the attic with you
I come out myself to look at the job, and before I say what to do, I'll ask what you've noticed, like a hot bedroom or a cold floor. I'd rather tell you your insulation is fine than sell you a job you don't need.
Every job checked before we leave
Our installers do the work, and I check it with them before we pack up, looking hardest at the eaves and the edges. I picked up that habit on a municipal crew keeping public buildings tight, and I've run this business the same way since I started it in 2021.
Licensed and insured on every job
We're licensed and insured, so somebody working above your ceiling isn't a risk you carry. Your satisfaction, guaranteed, and I'd rather hear a concern while we're still in the driveway than after we've gone.
Tyler permits filed when needed
When a city asks for a permit, we file it and set up the inspections, and if it isn't clear your job needs one, we check with that city's office before we start. In Tyler that's the Permits and Building Inspections office, which takes all permits and plans online from contractors registered with the city, so the paperwork lands on us, not you.
Most of what makes this job last happens before the first bag goes in the hopper, so tell us what you've noticed in your attic or call (903) 508-0953, and I'll come take a look.
Get a free on-site estimate for blown-in attic insulation
We reply to every call and message within one business day, and there's no obligation. After you send this, I'll set a time to come out, walk the attic with you, show you what I found and explain your choices before you decide anything. If you know the attic's rough square footage, or whether there are can lights or storage up there, add it to your note.
What blown-in insulation looks like
What people ask about blown-in insulation
Is blown-in insulation cheaper than batts?
Usually, yes, because blowing in loose fill costs less than laying batts and covers the attic floor more fully, though install costs vary from house to house. It settles in around wires, joists and odd corners where batts tend to leave gaps.
How much does blown-in attic insulation cost in Tyler, TX?
Across the US, installing blown-in attic insulation usually costs about $3.75 to $7.75 per square foot. That's what the work runs nationally, not our price, and where your attic lands depends on what I find up there. I'll give you your own number after I've walked it with you.
Should I seal air leaks before blowing in attic insulation?
Yes, sealing comes first because most insulation slows heat but doesn't stop air moving through it, and the usual leaks are at dropped ceilings, wiring and plumbing holes, light fixtures and bathroom fans. The U.S. Department of Energy puts the average savings at up to 20% on heating and cooling for insulating the attic, floors, crawl space and rim joists and sealing leaks across the whole house, so the attic by itself is one share of that.
How do I know if my attic needs more insulation?
Pull down the attic stairs and look, because if you can see the tops of the ceiling joists, or the insulation is deep in the middle and thin near the eaves, there probably isn't enough. A lot of older houses started out with very little up there. Tell me how old the house is and what you've noticed, and if what you have is fine, I'll say so.
Are Texas rebates for insulation available right now?
Not yet, because as of the state's August 21, 2026 update, the Texas rebates were still in the planning and design phase. A launch date will be set once the state has approval from the U.S. Department of Energy, and you can check the current status on the Texas Comptroller's rebate page.
How long does blown-in insulation take, and do we have to leave the house?
You usually don't need to leave, because the blowing happens in the attic and the material stays on the attic floor. How long we're there turns on the attic's size, how much sealing comes first and whether old material has to come out, and I'll tell you what to expect when I walk it. We cover the floor under the hatch and ask you to keep kids and pets clear while the hose is running.
Work that often goes with blown-in insulation
- Insulation removal
If the old insulation got soaked by a roof leak or critters have been nesting in it, pulling it out first keeps the new layer from inheriting the problem.
- Home insulation
When cold floors, drafty walls or a crawl space are part of the trouble, looking at the whole house tells you which fixes matter most and in what order.