Insulation Contractor in Henderson, TX - Warmer Floors and Cooler Upstairs Rooms
Elite Tyler Spray Foam Insulation is an insulation contractor based in Tyler, TX, working in attics, walls and crawl spaces across Henderson. We find where your house leaks, seal those gaps and add material where it's thin.
- Licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
Older homes, rentals and shops across Henderson
Henderson is an easy drive from our base in Tyler, and the calls we get there come from a real mix of buildings. There are older frame houses up on piers, brick ranch houses on quiet streets, newer builds toward the edges of the city, and a good number of rentals and small storefronts. We do the same work in Kilgore and Gladewater, and the houses in Henderson run a lot like theirs.
That mix matters, because each kind of house loses comfort in a different place. An older pier house usually needs attention underneath and in the walls, while a newer one more often has an attic that was done thin at the edges.
Our services in Henderson, TX
- Attic insulation
Many Henderson attics still hold a few settled inches from when the house was built. We measure what's there and top it up evenly, edges included.
- Attic air sealing
Older Henderson houses leak air through can lights, pipe holes and loose hatches. We seal those gaps first, so new insulation isn't fighting a draft.
- Crawl space insulation
Plenty of Henderson houses sit on piers over a crawl space, which is where cold floors start. We insulate under the floor and check for moisture before anything goes up.
- Insulation removal
Rentals and older homes here often have attic insulation matted by an old leak or full of droppings. We bag it out first, since covering it keeps the problem.
- Wall insulation
Older frame houses around Henderson often have empty or slumped wall cavities, so outside rooms stay drafty. Our wall insulation fills those cavities through small holes we patch afterward.
- Commercial insulation
Small shops and offices in Henderson often have thin insulation over drop ceilings or under metal roofs. We plan the work around your hours to keep disruption down.
What older Henderson houses need from insulation
Tell me first what you've noticed. If the floors feel cold and one room over the crawl space never warms up, the air moving under the house is usually why, because a house on piers is open underneath and whatever insulation got stapled up years ago has often sagged or dropped. Before we add anything, I go under with a light and look for standing water, torn vapor barrier and pests, since new insulation over a wet crawl space just holds the damp against your floor framing.
Upstairs, the usual complaint is a hot bedroom or the room over the garage. I measure how many inches are already up there, check whether the edges run thinner than the middle, which is backward, and make sure the eave vents stay clear, because a buried vent stops the attic from breathing and moisture shows up in the framing. If your ductwork lives in the attic, foam is worth a look even though it costs more, since it seals air while it insulates. Otherwise, sealing the gaps and topping up blown-in fill, loose insulation blown through a hose, usually gets you more for your money.
Get a free on-site insulation estimate in Henderson
Send us a few lines about what you've noticed in your Henderson house, and we'll get back to you within one business day. I come out myself, look at the attic, walls or crawl space with you, and show you what I found and your choices before you decide. The estimate is free, with no pressure and no obligation.
Insulation work up close
Henderson insulation questions answered
Do I need a permit to insulate my attic in Henderson, TX?
The City of Henderson's permit list doesn't name insulation by itself, so it's worth asking the city before work starts. Its permits cover new construction, structural alterations, remodeling, and electrical, plumbing and mechanical work, and for anything not listed the city asks you to call Community Development at (903) 392-0786. When the city asks for a permit, we handle the filing and set up the inspections, and if it isn't clear, we check with that office before we start.
Does an insulation contractor need a license to work in Henderson?
Henderson doesn't require building contractors to be licensed and bonded at this time, though electricians must hold a license with the city. Any contractor who needs a permit has to register with the city before applying, and the registration form lists a $50 yearly license fee for general contractors, good from January 1 to December 31. We're licensed and insured, and it's fair to ask any contractor you're comparing to show you the same.
How much does attic insulation cost in Henderson, TX?
The price comes down to what's already in your attic and what it needs, so I give you a figure only after I've looked. The biggest swings are whether soaked or dirty insulation has to come out first, how much air sealing the attic needs, how easy it is to get into, and whether you go with foam or blown-in fill. I show you what I found and explain your choices, so you know what you're paying for and why the work comes in that order.
How long does attic insulation take, and when can we go back inside?
The time in your attic depends mostly on its size, how easy it is to reach and whether old insulation comes out first, and I'll lay out the schedule when I walk it with you. With blown-in fill, most families stay home while we work. Spray foam is different, because the foam maker sets a re-entry time, the hours before people and pets can come back in, and we go by it.
How do I check if my Henderson house is in a flood zone?
Start with FEMA's flood map viewer, which FEMA calls the best place to begin for official flood hazard information on a property. It matters for us under the house, because a crawl space that takes on water changes what material belongs down there and whether a vapor barrier goes in first. If you've ever seen water under the house, tell me when I come out.
When does wall insulation go in during a remodel in Henderson?
On a permitted remodel, insulation goes in after the city's building official has inspected and approved the work behind the walls, because the city requires permitted work to stay open and exposed until it's approved. We work with your remodeling contractor so nothing gets closed up early, and when we're the ones filing the permit, we set up those inspections.