Insulation Contractor in Gladewater, TX - Cooler Upstairs, Warmer Floors
Elite Tyler Spray Foam Insulation is an insulation contractor based in Tyler, TX that works in Gladewater, sealing drafty attics, topping up thin insulation and keeping ground moisture out of crawl spaces under the city's older houses.
- Licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
Older houses and storefronts across Gladewater
A lot of what we see in Gladewater is older houses on the streets around downtown, along with rentals that landlords want kept comfortable and the shops along the main street antique district. Plenty of these houses sit on pier-and-beam floors, and their attics have had decades to settle. Many have been added onto, so a back addition or the room over the garage often runs hotter than the rest of the house. We drive over from Tyler for this work the same way we do next door in White Oak and Longview, and out west in Mineola.
That age shapes the job. In an older house the price usually turns on how much old material has to come out, how many gaps need sealing first and how hard the attic or crawl space is to get into, and the schedule follows that same prep. I'll give you your own numbers after I've walked the house with you.
Our services in Gladewater, TX
- Attic insulation
Many older Gladewater attics are down to a few settled inches, which is why the upstairs runs hot. We top them up with blown-in insulation, loose fill blown through a hose, and fill the spots that have thinned.
- Air sealing services
Drafty rooms in older houses here usually come from gaps around can lights, pipes and the attic hatch, not thin insulation. Our air sealing closes those gaps before any insulation goes in, so the draft stops where it starts.
- Crawl space vapor barrier
Cold floors and a musty smell usually trace back to damp dirt under a pier-and-beam house. We lay a vapor barrier, a heavy sheet that keeps ground moisture from rising, before anything else goes under the floor.
- Insulation removal
Attic insulation that got soaked by an old roof leak or filled with droppings has to come out first. Blowing new material over it just buries the problem, so we bag it, haul it off and clean up.
- Spray foam insulation
Rooms over the garage stay hot because they're surrounded by unheated, uncooled space on several sides. We spray foam into those walls and ceilings, where it fills the odd-shaped cavities loose fill can't reach.
- Commercial insulation
Shop owners in the older downtown buildings want the store to hold its temperature without losing business to the work. We plan the job around your hours and keep the dust off the sales floor.
What Gladewater ground and summers ask of a house
The land around Gladewater runs low-rolling to flat, with clay and sandy loam soils, and clay holds water after a rain while flat lots are slow to shed it. Under a pier-and-beam house that damp air rises into the crawl space, and the insulation under the floor soaks it up, sags and drops, which is why so many floors here feel cold in winter. Before we insulate underneath, I check the dirt, the vents and the framing, and if the ground is damp we cover it first, the same way you'd dry a floor before laying a rug on it.
Summer is the other half. An attic bakes all afternoon, and when insulation gets blown over the eave vents, the attic can't breathe and moisture starts showing in the framing. We keep those vents open and the coverage as deep at the edges as in the middle, because thin edges are where the heat gets in.
Get a free on-site insulation estimate in Gladewater
We reply to every call and form within one business day, and there's no pressure and no obligation. I come out to your Gladewater house myself, ask what you've noticed, walk the attic and crawl space with you, then show you what I found and explain your choices before you decide. We're licensed and insured, and our installers' work gets checked by me before we pack up.
What good insulation work looks like
Gladewater insulation questions answered
Do I need a permit for insulation work in Gladewater?
Ask the city's public works office, because that's who the City of Gladewater lists for permits, at publicworks@cityofgladewater.com or 903-845-2196. Construction there has to meet the local requirements in the city's code of ordinances, which the city posts online. When the city asks for a permit, we file it and set up the inspections, and if it isn't clear, we check with that office before we start.
Which building code applies to insulation in a Gladewater home?
The city's building inspector checks construction against the building code Gladewater has adopted, and on top of that the state sets a minimum energy code that applies everywhere in Texas. For a single-family home, that minimum is the energy chapter of the International Residential Code, and other kinds of residences fall under the International Energy Conservation Code. That second one matters if you're a landlord with more than single houses.
How much does insulation cost for a house in Gladewater?
There's no honest number until I've been in your attic or crawl space, because the price rests on the prep I described above and on the material you pick. Foam costs more than loose fill, and a clean attic that just needs topping up keeps the price down. If your job needs a city permit, the fee is on the city's fee schedule, but that page was last updated in 2021 and the city says it may not be current, so call City Hall at 903-845-2196 to check.
Which county is my Gladewater home in?
Most of Gladewater sits in Gregg County or Upshur County, and a small part of the southwest side is in Smith County. For insulation work inside city limits, start with the city's permit contacts whichever county you're in. If you're not sure your address is inside the city, call us and we'll check before we start.
How do I know if my Gladewater house needs more insulation?
Look at how many inches are in your attic and whether the tops of the joists show through, then think about what you've noticed, like a hot upstairs, a cold floor or a power bill that keeps climbing. In older houses here the insulation has often settled thin or got wet years ago. I'll come look and tell you straight, and if what you have is fine, I'll say so rather than sell you a job you don't need.
What is the best way to insulate a Gladewater attic that has ductwork in it?
When the ducts live in the attic, spray foam under the roof is usually worth the higher price, because it seals air while it insulates and keeps those ducts out of the summer heat. Without ductwork up there, sealing the gaps and topping up loose fill usually gets you most of the benefit for less. I'll show you which way your attic points before you decide.