Attic insulation in Tyler TX - a sealed attic floor and a cooler upstairs
Hot upstairs or a power bill that keeps climbing? We seal the gaps in your attic floor, then insulate it evenly to the edges.
Why is my upstairs so hot, and will attic insulation fix it?
Attic insulation in Tyler, TX means sealing the air leaks through your attic floor and then adding insulation over them. Done in that order, it can do more for comfort and your power bill than any other insulation project in the house.
Most people call because the upstairs never cools off in summer, the room over the garage is the worst room in the house, or the power bill keeps creeping up, so the first thing I'll ask is what you've noticed. Up in the attic, I usually find a thin layer that's slumped over the years, gaps around pipes and lights that let air pour through, or old material soaked by a leak or full of droppings, which has to come out through insulation removal before anything new goes on top. The price mostly turns on how big the attic is, how much is already up there, how many gaps need sealing and whether old material has to go. The schedule turns on whether a roof leak, old wiring or a fan venting into the attic has to be fixed first. When I come out, I show you what I found and explain your choices before you decide anything.
How we handle attic insulation, step by step
I start by checking whether your attic is ready, because insulation laid over a problem just hides it. I look for roof leaks, active knob-and-tube wiring, the old wiring strung on porcelain knobs that gets replaced first for fire safety, and any bathroom, kitchen or dryer fan blowing into the attic instead of outside, and if I find one, you'll want it fixed before we start. Then our crew does the air sealing, closing the openings through the attic floor around pipes, wires, light fixtures and the hatch, because insulation over an open gap is like wearing a sweater in the wind. We keep the eave vents clear so the attic can still breathe, lay the new insulation evenly all the way out to the edges where it's usually thinnest, and show you photos from before and after so you can see what you paid for.
In most vented attics I'll recommend blown-in insulation, loose fill blown through a hose so it settles around joists and wiring without leaving gaps. Spray foam costs more and seals air while it insulates, so I usually suggest it only when your ductwork runs through the attic, since then it brings the ducts inside the sealed space. If the drafts and cold floors don't stop at the attic, our home insulation work looks at the rest of the house so each part gets done in the right order.
Why Tyler homeowners call Elite Tyler Spray Foam Insulation for attic insulation
I walk your attic with you
I come out myself to look at the job and walk it with you before anyone touches anything. Our installers do the work, and I check it with them before we pack up, so the person who looked at your attic is the one who signs off on it.
Permits filed, inspections set up
When a city asks for a permit on a job, we handle the filing and set up the inspections, and if it isn't clear, we check with that city's office before we start. That goes for Tyler and the cities around it across East Texas, and if you don't see your city on our site, call and ask.
Trained on public buildings
I learned this trade on a municipal crew keeping public buildings comfortable and tight, and I started this business in 2021. We're licensed and insured, and our promise is simple. Your satisfaction, guaranteed.
It helps to have a rough idea of your attic's size and to know about any roof leaks, old wiring or recessed lights up there. Call (903) 508-0953 or send us a message, and I'll set a time to come take a look.
Get your attic looked at and your choices explained
We reply within one business day to set a time that works for you. I come out, walk the attic with you, and show you what I found and what your choices are. The estimate is free and done at your property, with no pressure and no obligation.
Attic insulation work up close
Questions before you book attic insulation
How much does blown-in attic insulation cost in Tyler, TX?
Across the US, installing blown-in attic insulation usually costs about $4 to $7.50 per square foot, and that's a national figure, not our price. Where your job lands depends on the attic's size, how much is already up there, how many gaps need sealing and whether old material has to come out first. I'll give you your own number once I've been up in your attic.
Which insulation costs least for a vented attic?
Loose-fill fiber and fiberglass batts are the least expensive types of insulation, and both are good choices for the floor of a vented attic. That makes them the sensible place to start comparing, and in most attics I lean toward loose fill because it fills in around joists and wires instead of leaving seams.
How are building permits filed in Tyler, TX?
The City of Tyler takes all permits and plans electronically at TylerInspections.com, and contractors register with the city before they can apply. That makes it fair to ask anyone you're thinking of hiring whether they're registered. If your job needs a permit, we take care of that part, as I mentioned above.
What should I do if my attic has vermiculite insulation?
Leave it undisturbed, because vermiculite, the pebbly gray-brown kind that looks a bit like gravel, may contain asbestos. Mention it when you call, before anyone works up there, so nobody stirs it up and we can talk through what comes next.
How do I know if my attic needs more insulation?
Look for loose fill that's thin or missing, especially out at the edges, and batts that are squished or pushed aside around wiring or recessed lights. It's also worth asking whether your can lights are ICAT-rated, made to sit in insulation and sealed against air, since the ones that aren't get a cover first. If you're not sure what you're seeing, I'll go up and tell you, even if the answer is that your insulation is fine.
What is the best time of year to insulate an attic?
Most attic insulation projects can be done any time of year. What usually sets the schedule is whether a roof leak, old wiring or a fan venting into the attic has to be fixed first, so the sooner I see the attic, the sooner we both know.
Other insulation work an attic often leads to
- Blown-in insulation
If your attic floor has a thin, uneven layer or bare spots near the eaves, loose fill blown in through a hose evens it out across the whole space.
- Home insulation
When cold floors or a hot room over the garage point past the attic, we look at walls and the crawl space and plan the whole house in order.